JL/JE Series Manual/Electric High Lift Trucks

Introduction of high lift truck

High lift truck is a new design with larger piston to offer you real 1000kg and 1500kg capacity. This series JL are manual high lift pallet jack and JE are electric high lift truck. It is very suitable as transpalette manuel combiné et table élévatrice. Avec la poignée chaude ergonomique, il est très simple et confortable à utiliser. De plus, les pieds de support avant et les stabilisateurs réglables s'étendent automatiquement au sol avec la montée de la fourche, ce qui peut assurer une stabilité maximale et un freinage optimal. Il peut conserver la même vitesse quel que soit le camion avec ou sans charge.

This high lift pallet trucks can lift the pallets loading or unloading to the height you need. they can be used in various applications like factory, workshop, warehouse etc.

The manual high lift pallet truck has model: JL5210, JL6810, JL5215, JL6815;

The electric high lift pallet truck has model: JE5210, JE6810, JE5215, JE6815

             Manual high lift pallet truck JL series

We have this item in stock in France, if you are located in Europe, we can arrange delivery to you ASAP! This way will save your time and shipping cost.

Specifications of manual high lift skid jack truck:

Electric high lift pallet truck JE series

 

• High quality oil cylinder: The integrally sealed hydraulic cylinder can effectively avoid the disadvantages of oil leakage, improve the safety performance of the whole vehicle, lift quickly and improve work efficiency.
• Comfortable handle: Ergonomic design, the outer layer is rubberized and non-slip, the operation feels comfortable, and the drop speed of the hand-pulled pressure relief heavy cargo is controllable, which improves the operation safety.
• Exquisite workmanship: The surface of the car body has been subjected to high temperature baking paint, electrostatic spraying, the surface is smooth and smooth, durable, beautiful and corrosion-resistant.
• Anti-pinch scissors: The scissors are designed with increased spacing and anti-clamping to prevent accidental clamping of other items. Thickened steel enhances the bearing capacity, making it safer and more durable.

• Extrêmement facile à pomper et à éclairer, cette unité convient parfaitement comme transpalette manuel combiné et table élévatrice
• Contrôle automatique de la vitesse de descente par une vanne hydraulique unique, la vitesse décroissante reste toujours la même quel que soit le camion avec ou sans charge. Cela empêchera les dommages à la cargaison de descendre rapidement.
• Conception robuste: le cadre de fourche en plaque d'acier de 4 mm et le piston de levage plus grand garantissent au camion d'atteindre la capacité nominale.
• Convient parfaitement comme transpalette manuel combiné et table élévatrice
• Pieds de support avant et stabilisateurs réglables étendus au sol automatiquement lorsque les fourches atteignent une hauteur de 420 mm, pour assurer une stabilité maximale et un freinage optimal.
• Conforme à EN1757-4.

Attention et entretien:

Ne surchargez pas;
Si les conditions du sol peuvent être utilisées;
Chargez les marchandises correctement;
Porter des chaussures et des gants de sécurité lors de la manipulation;
Veuillez faire un contrôle de fonctionnement approfondi avant chaque utilisation;
Assembler la machine avec la bonne technique de levage;
Don't overlook the potential dangers that may exist during operation.

Proper maintenance will extend the life of the truck.
Check the oil, remove air and lubricate during maintenance.
Check the oil level every six months.
The newly injected oil to the rubber container should be 5mm below the liquid level, and the fork must be at the lowest position when adding oil.
When replacing the seal, air may enter the hydraulic system, place the joystick in the LOWER position, and then swing the handle a dozen times.
Lubricate the movable part with motor oil or oil.
Also pay attention to daily inspection and maintenance.
Inspection of the truck can reduce wear as much as possible.
Special attention should be paid to the wheel, axle, handle, fork, lift and lowering control.
Whenever work is completed, the fork should be unloaded and lowered to the lowest position.